Thread milling cutters

For the production of true to gauge internal threads with CNC milling machines. The thread is machined by helical interpolation. 

 

Advantages of thread milling with end thread milling cutter 

  • Thread dimensional accuracy can be influenced 
  • tool breakage does not lead directly to workpiece scrap
  • lower power requirement than for tapping
  • short machining times due to high cutting speeds
  • very good surface quality of the threads
  • large diameter range can be machined with the same pitch
  • no chip problems (due to short milling chips)
  • right or left-hand threads, blind and through holes can be produced with the same tool
  • low milling forces, Machining of thin-walled workpieces is possible
  • cutting speed and feed rate can be individually adapted to the material to be machined
  • avoidance of chip root residues in the bottom of the bore
  • no change of direction of rotation with the main spindle necessary
  • no thread cutting chuck required, milling cutter chuck is sufficient
  • exact thread depth
  • no thread breakage
  • for blind hole threads thread production close to the bottom is possible
  • low tool costs for large threads
  • easy machining of difficult to machine materials

 

Carbide thread milling cutter - type HM-F

Solid carbide thread milling cutter TICN coated with central cooling channel without countersink chamfer. 

1. simple and cost-effective variant for milling internal threads 

2. application only in materials up to 1000 N/mm² strength

3. straight shank with HA or HB shape

 


 

Solid carbide thread milling cutter with central cooling channel without countersink chamfer

Carbide thread milling cutter - type HM-FM

Solid carbide multi-range thread milling cutter TICN coated with central cooling channel. 

1. universal application possibilities

2. for different thread sizes with same pitch 

3. straight shank with HA or HB shape

 

 

 

 

Solid carbide multi-range thread milling cutter TICN coated with central cooling channel

Carbide thread milling cutter - type HM-FS

Solid carbide thread milling cutter TICN coated with central cooling and 45° countersink chamfer. 

1. countersinking and thread milling with only one tool 

2. very quiet running and low lateral forces 

3. predestined for use in materials that are difficult to machine 

4. straight shank with HA or HB shape

 

 

Solid carbide thread milling cutter with central cooling and countersink chamfer

Carbide thread milling cutter - type BGF-K

Solid carbide drill thread milling cutter with 45° countersink chamfer with cooling channel.  

1. drilling, countersinking and thread milling with only one tool 

2. reduced machining times and tool costs as well as reduced space requirements 

3. application only in aluminium, cast materials, brass and plastic  

4. straight shank with HA or HB shape

 

 

Solid carbide drill thread milling cutter with countersink chamfer and cooling channel

Contact us

Do you have questions about our products and catalogues or would you like to send us an inquiry?
Our support offers you expert advice with quick answers and offers via our contact form.
We look forward to your message!